Objective To study the performances in adsorbing and desorbing of polyphenol from banana peel by macroporous adsorptive resin.
When one can smell out the odor of solvent, it shows the adsorbent is disabled, and it needs to be replaced immediately.
Activated carbon fibre was selected through tests as an optimum adsorbent for butyl acetate in gas. The main factors affecting the adsorption performance were studied.
An absorbent or adsorbent material used in certain manufacturing processes, such as the nitroglycerin used in making dynamite.
Considerable quantities of CO2 are adsorbed even by perfectly dry glass power.
After a description on the design principle and mathematical model for a vertical dual bed radial flow adsorber, the structure design of this kind of adsorber was presented, followed an introduction of the commissioning.
Although samples were in a hot reflux for a long time at 85℃ in the experiment, and 5? molecular sieve of the adsorbed sample was acidized hydrofluoric acid, the analytical method was tested to have little influence on carbon isotopic composition of the saturated hydrocarbons before and after complexation.
According to the BGS, the arsenic is adsorbed onto particles of iron oxyhydroxide, which are reduced organic extracts in the water itself, releasing arsenic.
At the same surfactant concentration, the larger of molecular weight of the surfactant, the higher of its adsorbance on oil sand.
ADSORPTION AND WETTING Ⅰ. THE CONFIGURATION OF ADSORBED NONIONIC SURFAOTANTS ON SiO_2/OYOLOHEXANE AND SiO_2/WATER INTERFACES